GAMES
Dead by Daylight’s The Dredge: a Beginner’s Guide
The Dredge
A horrifying abomination emerges from the darkness. Its presence blackens the air, draining all hope. The Dredge and its thrilling new Power – Reign of Darkness – have come to Dead by Daylight, introducing a new layer of horror action to The Entity’s Realm.
The Dredge’s Reign of Darkness Power grants several special abilities, including The Gloaming. Use The Gloaming to teleport to any locker on the map, creating a Remnant (think of it like a spectral placeholder) in the process. With numerous lockers positioned in various places on any given map, this grants The Dredge serious mobility. Should you decide against teleporting, you can instead return to your Remnant and regain any lost ground.
Whether you’re looking to learn The Dredge or increase your chances of survival against it, we’ve got you covered with a few tips and tricks.
Three Tips for Playing as The Dredge
Teleport Techniques
While The Dredge’s teleportation is an effective means of traversing the map, it can also be used to great effect in a chase. If you see a Survivor running toward an extensive loop – a main building or the Killer’s Shack, for instance – it’s likely there will be a locker close by. Use your teleportation to make predictions, emerge from a locker, and cut them off.
As the Trial progresses and the generators dwindle, be careful not to spread yourself thin. Be mindful of how generators are spread around the map and try to pinpoint which ones are worth holding on to. It might be tempting to teleport across the map to protect a lone generator, but that cooldown can prove costly if Survivors take advantage of your absence – especially in the late-game.
Shut Down Loops
With a high skill ceiling, the Remnant aspect of The Dredge’s Power allows for plenty of exciting mind games. While a Survivor is attempting to lure you into a lengthy loop-heavy area, strategically create a Remnant at key chokepoints to effectively cut them off mid-chase.
Consider creating a Remnant near a pallet or window, as it is likely a Survivor will want to make use of that. Should Survivors seem intent on running around a structure multiple times, anticipate this and use your Remnant to close the distance. Just remember, Survivors can remove your Remnant through direct contact, so try to predict their movement.
The Gloaming
The Dredge is darkness manifested, so naturally, it thrives when the lights go out. When the Night Cycle begins, remember that Survivors will be far more disoriented than yourself. Know that you hold the advantage in chases, and areas that Survivors may have skilfully navigated beforehand might now give them trouble.
That’s not to say the Nightfall will guarantee a successful end to your chase – but it’s worth noting that Survivors will have their vision severely hindered. Is there any sweeter sight than a Survivor running into a wall?
We hope you enjoy playing as The Dredge, and wish you luck in the trials to come…but what happens should you cross its path as an opponent?
Three Tips for Surviving The Dredge
The Dredge is an oppressive and disturbing Killer, one that can swiftly darken a Survivor’s day. Only the bravest stand a chance – and new Survivor Haddie Kaur is not lacking in that department.
Haunted by chilling visions since childhood, Haddie Kaur was driven to face the horror of realms beyond. Throughout her journeys to the world’s haunted corners – which she covered extensively on her podcast Ravages of the Abyss – shedeveloped several tools to help her deal with this terrifying new threat.
Should you find yourself facing The Dredge, whether as Haddie or any other Survivor, here are a few helpful tips to brighten up the darkness.
Manage The Nightfall
With all the excitement a trial brings, it can be easy to lose track of the HUD. When facing the Dredge, however, it helps to pay close attention to the meter surrounding your character icon. Knowing when the map will darken will keep you one step ahead. It might sound like a small suggestion but keeping a watchful eye on that HUD could be the difference between life and death, as certain areas can really spell trouble in the dark.
Watch for Signs
Should you find yourself pursued by The Dredge, you may opt to beeline for the closest loop, main building, or Killer’s Shack. If there is a locker nearby, The Dredge might teleport and emerge from it, cutting you off in the process. Keep an eye on its arm – if you see it rise, The Dredge is in the process of charging its power, so be on guard a teleportation play. It’s also wise to observe lockers for signs of its presence, as The Dredge leaves subtle visual and sound clues while inside of one.
Mind Those Locks
While The Dredge can teleport across the map, you can impede its process by placing a lock on a Locker door. Doing so will delay The Dredge’s exit, as it will take several seconds for the lock to be destroyed. It may be tempting to shore up the security at the beginning of a match, but remember that each Locker can only be locked once. If The Dredge smashes every lock by a trial’s halfway point, you may be facing a challenging endgame.
Whether you choose to embody fear as The Dredge or embrace courage as Haddie Kaur, Dead by Daylight’s Roots of Dread Chapter features a thrilling dose of horror action. Not only that, but Dead by Daylight is celebrating its sixth anniversary with the Twisted Masquerade in-game event from June 16th to June 30th, featuring exciting challenges, unlockable cosmetics, and much more. The Deals Unlocked sale will also be ongoing, bringing 60% discount on the Base game (June 7-23), 50% discounts on select DLCS (June 7-16), and more. We hope these tips and tricks prove helpful in the trials to come. See you in The Fog!
Dead by Daylight
Behaviour Interactive Inc.
$29.99
$11.99
Ever wished to play as one of the characters from your favorite horror movies? Dead by Daylight is a 1v4 multiplayer game that draws from all corners of the horror world from a powerful slasher to a terrifying paranormal entity.
Choose between playing an unstoppable Killer and one of 4 Survivors trying to evade a gruesome death. Each character has their own deep progression system and plenty of unlockables that can be customized to fit your personal strategy. Work together to escape, or stalk and sacrifice every Survivor.
This Edition of Dead by Daylight gives you access to a roster of 7 Killers (The Trapper, The Hillbilly, The Wraith, The Nurse, The Hag, The Huntress and The Doctor) and 9 Survivors (Meg Thomas, Claudette Morel, Jake Park, Dwight Fairfield, Ace Visconti, Nea Karlsson, Bill Overbeck, Feng Min and David King). It also includes two cosmetic add-ons packed with outfits for various characters.
// Facebook Script.
XboxUtils.isCookieClear(function () {
window.fbAsyncInit = function() {
FB.init({
appId : ‘451154101753332’,
xfbml : true,
version : ‘v9.0’
});
};
(function(d, s, id){
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) {return;}
js = d.createElement(s); js.id = id;
js.src = “https://connect.facebook.net/en_US/sdk.js”;
js.async = true;
js.defer = true;
js.crossorigin = ‘anonymous’;
fjs.parentNode.insertBefore(js, fjs);
}(document, ‘script’, ‘facebook-jssdk’));
}, ‘Required’ );
// Twitter Widget script
XboxUtils.isCookieClear(function () {
var tag = document.createElement(‘script’);
tag.src = “//platform.twitter.com/widgets.js”;
var firstScriptTag = document.getElementsByTagName(‘script’)[0];
firstScriptTag.parentNode.insertBefore(tag, firstScriptTag);
}, ‘Required’ );
// Bing Translate.
XboxUtils.isCookieClear(function () {
setTimeout(function(){{var s=document.createElement(‘script’);s.type=”text/javascript”;s.charset=”UTF-8″;s.src=((location && location.href && location.href.indexOf(‘https’) == 0)?’https://ssl.microsofttranslator.com’:’http://www.microsofttranslator.com’)+’/ajax/v3/WidgetV3.ashx?siteData=ueOIGRSKkd965FeEGM5JtQ**&ctf=True&ui=true&settings=Manual&from=en’;var p=document.getElementsByTagName(‘head’)[0]||document.documentElement;p.insertBefore(s,p.firstChild); }},0);
}, ‘Advertising’ );
Source link
GAMES
This Week’s Deals with Gold and Spotlight Sale
GAMES
The German Empire Marches to Italy in a Free Expansion Today
We have a new expansion for our WW1 Italian Front FPS game Isonzo releasing today! It’s the first part of our Caporetto season of free expansions, and features a whole new faction with the arrival of the German Empire on the Italian Front, and brings a new map for the Offensive game mode. There will be two more releases in the Caporetto season, each one with a new map to ultimately link together into a three map Caporetto Offensive.
The German faction comes with more than ten new weapons, as well as historically accurate uniforms and equipment. This first Caporetto map sees you taking part in the early stages of the Twelfth Battle of the Isonzo, with German troops assaulting Italian positions on the road to Caporetto. Historically it was a military disaster for Italy which brought down the government – but maybe things can go differently with you on the battlefield?
The update sees new uniforms and equipment from the German Empire for Isonzo’s six classes: Rifleman, Assault, Engineer, Officer, Marksman and Mountaineer. For those who aren’t familiar with the game, each class has different weapon, gear and perk options that allow you to specialize your play style within the overall focus of the class. For instance, Marksmen are always sharpshooters, but a lot depends on your loadout. You could be a long-range sniper and observer identifying and eliminating high value targets with a scoped rifle, or you could equip body armor to take and hold a front line position with deadly accurate mid-range fire. Every class has choices to make in this regard.
In Isonzo’s signature Offensive game mode, one side must attack and break through multiple defensive lines. Thick layers of barbed wire, trenches, and whatever extra defenses the enemy engineers put together will stand in the way of a successful attack. Objectives can be taking and holding key points, or planting dynamite to sabotage enemy supply stashes or heavy artillery guns.
The new Caporetto map – the first of three in the season – is a huge battlefield based on the strategically important Monte Kolovrat. There are five defensive lines, where each line has two objectives for the attackers before they can advance further. While in the historical Battle of Caporetto both German and Austro-Hungarian forces were involved, in Isonzo we’ve chosen to focus on the German contribution, so the map recreates the stunning German advance from the town of Tolmein all the way to Kolovrat Ridge. It’s a damp, overcast day when the attack begins, and the attackers must first cut their way through lines of wire to break into a devastated town – including capturing a church defended by multiple heavy machine gun positions. Fortunately, in Isonzo there are many tactical options available to deal with such strong points: artillery barrages, smokescreens, snipers, rifle grenades, even poison gas. From there, it becomes a literal uphill battle for the German attackers as they begin to climb towards the peak of Kolovrat Ridge. They’ll need to sabotage bunkers and capture command posts while navigating rocky trenches and steep forested slopes. At the penultimate fourth defensive line there is a huge siege mortar to sabotage and a cluster of houses providing cover to the Italian defenders – then it’s one last climb to reach the final objective: Hill 1114. If the Germans can take it, the Italians will finally be the ones fighting uphill as their reinforcements stream in to try and counterattack.
Of course, things are no walk in the park for the defenders either – although it’s easier to maneuver when going downhill, and it’s much simpler for officers to deploy flares to call in support, the extensive trench lines can become a liability once the Germans get a foothold, providing cover as they advance. Some of the Italian defensive positions can be exposed against the sky, making it easy for German marksmen to pick off targets. Italian engineers should make good use of their construction abilities to put down additional sandbags and lay out extra wire to prevent German assault troops sneaking through the trees to flank trenches with their grenades or light machine guns.
As we mentioned before, historically the Battle of Caporetto was a disaster for the Italians. Appalling leadership led to poorly motivated and unprepared troops falling apart in the face of the combined Austro-Hungarian and German armies using cutting edge infiltration tactics. The Italian soldiers were not allowed to retreat until too late, and in the end hundreds of thousands would surrender. After Caporetto the top Italian general was fired and replaced by someone far more competent, who managed to turn the war around for the Italians. In Isonzo, it’s a more fair fight where both sides have an equal chance of winning, if they can use all the tactical options available better than their opponents.
The release will also bring other improvements to the game, including a prestige mode and higher level cap. Additionally, for those who want more options for visual customization of their character, the Royal Units DLC is releasing alongside the free expansion and contains uniforms from the German Kingdoms of Bavaria and Württemberg. Though part of the German Empire, these states had their own distinctive uniforms which we’ve carefully recreated with the same accuracy and attention to detail as with the other uniforms in the game.
The Battle for Caporetto Begins…
Isonzo is available right now on the Microsoft Store for Xbox, and the free Caporetto expansion is out today! Plenty of time to master the art of mountain warfare before the German Empire joins the action on the Italian Front. Follow us to get the latest development news as we add the finishing touches!
We’ll see you in the trenches!
Isonzo
BlackMill Games
$29.99
World War One expands to the mountains of the Italian Front – beautiful but deadly in equal measure. Inspired by the two year struggle for control of the Isonzo river valley and the Alps during World War One, Isonzo elevates the WW1 Games Series, figuratively and literally.
From the makers of Verdun and Tannenberg…
Take part in historical offensives from the Sixth Battle of the Isonzo to the Strafexpedition. Reflecting the course of the actual battles, as the attackers advance the fighting will shift through vastly different landscapes within a single offensive: from hillside fortresses to mountain trenches and fierce urban combat on city streets. Everything is recreated based on research and field trips, from sound effects and uniforms down to the houses, vineyards and trenches you’ll be fighting over.
The new Offensive game mode puts you right in the middle of key historical offensives on the Italian Front. Lead the charge across stunning Italian landscapes as you choose your path to victory – cut paths through barbed wire, flank your enemies by following mountain trails, or man a mortar to blast a way through. Shape a dynamic battlefield by laying sandbags and wire, placing ammo crates, deploying trench periscopes or sniper shields, and more.
Call in support with a unique historically accurate flare system: flare guns can mark targets for artillery or biplane flybys, or different colored flares can be used to guide your team. Once the big guns have softened up the enemy, finish the job at close quarters with an Arditi dagger or mountaineer’s pickaxe. Man heavy machine guns, mortars and even mountain guns for more direct fire support.
Choose from six classes based on historical combat roles and build your loadout from a selection of weapons, equipment and perks linked to that class, giving flexibility and variety while staying grounded in what real soldiers might have carried. You’ll be operating wire cutters, bandaging yourself and wounded teammates, and blowing the whistle to start an assault. One shot can kill and even lighter injuries can lead to quickly bleeding out.
Being an effective soldier in Isonzo is not just about being a good marksman. Mastering the terrain is also key – the mountain can be a friend or foe. Learn how to navigate well to maintain cover and surprise your enemies or support your allies.
Finally… watch out for the dreaded poison gas. You’ve never experienced WW1 action quite like this!
Isonzo key features include:
• MOUNTAIN WARFARE: Assaulting mountain fortifications, battling through ruined towns, and fording rivers are just a few of the challenges you’ll face as you fight your way through numerous enemy positions
• TACTICAL MULTIPLAYER FPS: Choose your role and loadout carefully to survive this high altitude combat – play a sniper to pick off the enemy engineers before they can cut your wire, use rifle grenades to clear enemy machine guns, and much more
• WORLD WAR ONE GAMEPLAY: Historical Offensive game mode based on real battles and focused on the unique challenges of Alpine warfare. Fight with 30+ WW1 weapons, poisonous gas attacks, and intense artillery barrages
• BUILD FOR VICTORY: Place your own wire, sandbags, trench periscopes, and more! Whether you’re digging in or on the attack, shaping the battlefield to your advantage will be key to victory
• FACES OF WAR: Make every class your own by picking from a variety of historically class-appropriate uniforms, accessories and headgear. As a finishing touch, you can even pick your mustache from several famous period-accurate styles!
• AUTHENTIC WW1 ATMOSPHERE: Accuracy in everything from maps and weaponry to music and the uniforms – fight for the Kingdom of Italy, the German Empire or the Austro-Hungarian Dual Monarchy
MORE GAMES IN THE AUTHENTIC WW1 GAME SERIES
Immerse yourself in more WW1 action with our other standalone titles Tannenberg and Verdun. Experience trench warfare on the Western Front in Verdun, or maneuver for control of key sectors in Tannenberg on the Eastern Front. These authentic WW1 shooters let players choose from a range of squads from across the war, as they fight for control of the ever-changing frontlines.
GAMES
Transport Fever 2: Console Edition is Bringing the Full Transport Tycoon Experience to Xbox
Today, we proudly share a sneak peek into the development of Transport Fever 2: Console Edition, and how we managed to bring the full transport tycoon experience to Xbox.
Transport Fever is a very popular and highly rated transportation tycoon franchise on PC. Its latest entry, Transport Fever 2, delivers a level of size and detail never before seen in the genre. The goal of the game is to build a successful transportation company by constructing railroads, streets, water and air lines. Starting in the 19th century, the player connects towns and industries to transport both passengers and cargo. In addition to a customizable free game mode, there is also a fully-fledged campaign mode with challenging missions set in real-world transportation history.
After the huge success of Transport Fever 2 on PC, it was only logical to bring the experience to consoles as well. Not only that, but no efforts were spared to give the console community the full experience that made the game great on PC. In order to achieve this, the engineers at Urban Games had to pull some rabbits out of their engineers’ hats.
Always providing the freshest layer of paint
One of the most cherished features of Transport Fever 2 are its highly detailed vehicles. The game comes with more than 200 lovingly hand-modeled trains, ships, and airplanes, each sporting multiple 4k textures and normal maps.
On PC, it is easily affordable to have all the models and textures in memory whenever needed, as a typical rig has 16 GB of RAM and a GPU with a dedicated extra memory. Consoles, however, are built differently. They have a unified architecture with an overall smaller amount but ultra-fast memory. The key to make it work on consoles is texture streaming, which allows to clear textures of models that are not in view anymore. Moreover, this technology is used in Transport Fever 2 to constantly load textures at the highest affordable resolution to present the stars of the show, like the classic Class A 3/5 steam locomotive, in their best coat of paint at all times.
Keeping the ground like a console pro
A trademark of Transport Fever 2 are its huge maps. During development of the game, it was always paramount to provide a real sense of scale. The engine should allow for maps where a high-speed train, such as the famous Japanese Shinkansen, can really make use of its superior speed. So, a lot of effort was put into designing a highly effective terrain rendering pipeline that can handle maps of more than 120 sq miles of size with a detail resolution of almost 1 yard. Central to this is a dynamic terrain tessellation algorithm on the CPU that, while costing a bit of extra memory, makes sure the engine can render these maps on a wide variety of PCs.
Now, enter the world of consoles with their incredibly well-designed GPUs and graphic APIs. Here, the hardware can be leveraged very well for terrain rendering by making use of the GPU tessellation feature. This feature generates the render mesh for the terrain fully on the graphics card, saving valuable processing time for the complex economy and city growth simulations. While generating more triangles, the hardware approach still costs less memory overall due to its efficiency. So vast maps can be viewed from a bird’s view high up in the sky and seamlessly zoomed in down to individual rocks on a riverbank.
Inspiring the inner architect
Finally, let’s talk about constructions, a central and defining part of the Transport Fever 2 experience. Constructions are large assemblies that consist of dozens of assets, street segments, ground decals and terrain modifications. Think of structures like airports, train stations, docks, highway crossings, and many more. Anything that is needed to build a vast transportation empire.
For a smooth construction experience, it is key that the player really feels that he has precise control over the building placement. On PC, constructions are typically built using the mouse. As the average PC user is very well adjusted to this method of input, it is sufficiently performant to calculate the entire construction each frame and place it under the cursor. However, on consoles, the best way of building constructions is to have them always kept in the center of the screen and move the camera along the map for placement. And moving the camera needs to be as smooth as silk.
So, for the console release of Transport Fever 2, the construction preview pipeline was overhauled. All dynamic calculations are now performed in the background while a static preview of the structure and its underlying ground plan are shown. Not only are constructions now completely stable in terms of FPS, but they also give feedback to the player on what environment features the construction would tear down when built.
Let’s get tycooning on console
We are very excited to bring the Transport Fever franchise to consoles for the first time ever with the release of Transport Fever 2: Console Edition on Xbox Series X|S and Xbox One in February 2023, and we hope you will enjoy it as much as we did developing it.
-
WORDPRESS7 days ago
WP Engine sues WordPress co-creator Mullenweg and Automattic, alleging abuse of power
-
SEARCHENGINES6 days ago
Google Ranking Volatility Record, Forbes Advisor Slapped, Bing Generative Search Experience & More
-
WORDPRESS6 days ago
Automattic demanded web host pay $32M annually for using WordPress trademark
-
SEO5 days ago
Google’s AI Overviews Avoid Political Content, New Data Shows
-
SEO6 days ago
8% Of Automattic Employees Choose To Resign
-
SEARCHENGINES4 days ago
Google Shopping Researched with AI
-
WORDPRESS5 days ago
5 Most Profitable Online Businesses You Can Start Today for Free!
-
WORDPRESS4 days ago
8 Best Banks for ECommerce Businesses in 2024
You must be logged in to post a comment Login